太仓全自动注液机

所属分类：太仓全自动直线注液机
点击次数：
发布日期：2019/03/26
规格：
类型：
在线询价

详细先容

设备技术规格Equipment Specification

序号	项目	技术参数	说明
1	稼动率 Utilization Rate	≥96%
2	合格率 Pass Rate	≥99.2%
3	注液精度 Injection Accuracy	±0.8%，
4	注液量范围 Injection Range	冉鹕吵怯槔止俜狡教ㄢ可调 Adjustable
5	注液时间 Injection Time	10min
6	高压 High Pressure	1）高压：400-600KPa；	控制精度：设定值±5%，可调 Control accuracy: ±5% of the desired value, adjustable
6	高压 High Pressure	2）压力可调 Adjustable
7	真空 Vacuum	-95KPa-0	控制精度：设定值±5%，可调 Control accuracy: ±5% of the desired value, adjustable

1. This device is designed for square shaped Lithium Batteryinjection process. It mainly includes pre-injection weighing, injection cup injection, left standing under positive pressure, ect.

2. Main features: the use of both High Pressure and Equal Pressure injection process

3. High Pressure injection process is to leave the battery stand still under high pressure and vacuum alternately, which is to accelerate the electrolyte absorption. The pressure will be between 0.4 to 0.6 mpa.

Equal Pressure injection process is to increase the pressure internally and externally at the same time when leave the battery stand still. This will keep the pressure balance, which can avoid bulge or other damage.

This High Pressure – Equal Pressure injection process can greatly improve the electrolyte absorption efficiency and penetration effect, as well as maintaining good consistency and high effciency, hence improve the quanlity of the products.