实验用注液机主要功能及原理先容：

此设备用于18650锂电池加注电解液的生产设备，通过电动陶瓷注液泵，经X,Y轴机械手将注液头前后左右移动把电解液加注到18650电池上部直口内，1盘电池144颗电池，144颗电池加好液，真空箱下压密封，通过抽真空和加压方式，把电解液注入到电池内部，整全过程须要注5唇鹕吵怯槔止俜狡教ê；抽真空约10次左右，（此项视电解液渗透情况而定，非绝对值）

   This equipment is used for electrolyte injection for 18650 lithium batteries. Through the electrical ceramic inject pump, the injection head is controlled by a 2 axis robot arm to inject the electrolyte into the upper opening of the 18650 batteries. There are 144 batteries in a single plate. After the injection is finished, the batteries are put into a vacuum box, left standing still under high pressure and vacuum alternately to ensure the batteries fully absorb all the electrolyte. During the process, there will be around 5 injections and 10 vacuum treatments. (However the numbers may vary depending on the electrolyte penetration.)

5.6设备技术规格 Equipment Specification